Comunique-se com o fornecedor? fornecedor
Brandon Bao Mr. Brandon Bao
O que posso fazer por você?
conversar Agora Fornecedor
 Número De Telefone:86-0574-83879820 E-mail:brandon@brandopneumatic.com
Página inicial > Lista de Produto > Válvula solenoide > COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
  • COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
  • COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve
  • COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve

COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve

    Tipo de pagamento: L/C,T/T,Paypal,Money Gram,Western Union
    Incoterm: FOB,CFR,CIF,EXW
    Quantidade de pedido mínimo: 1 Piece/Pieces
    Tempo de entrega: 4 dias

Informação básica

Modelo: BADV02

Name: Electronic Drain Valve

Type: COMBO JORC Type

Ambient Temperature: 34 - 131 °F

Power Connection: DIN 43650A

Valve Type: 2/2 Way, Direct Acting

Orifice Size: 4 Mm

Inlet/outlet Size: 1/4" (F) & 1/2" (M) NPT / 1/2" NPT

Inlet Connection Height: 0.4"

Body: Brass Or Stainless Steel

Valve Seal: FPM

Additional Info

Pacote: Boxes, Carton, Pallet

produtividade: 450000 pcs per month

marca: Brando

transporte: Ocean,Land,Air

Lugar de origem: China Ningbo

Habilidade da fonte: 110000 pcs per week

Certificados : CE

porta: Ningbo,Shanghai,Yiwu

Descrição do produto

COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valve


This COMBO / COMBO-D-LUX / COMBO-QUICKSET electronic drain valve is the same type of jorc type , used for air compressors, filters, separators, dryers, gas storage tanks, drip feet and other compressed air system components. The electronic automatic drain solenoid valve is matched with an analog analog solid-state electronic timer and a solenoid valve to achieve automatic timing discharge of condensate in the compressed air system. It is widely used in the components of compressed air systems such as screening programs, separators, dryers, gas storage tanks, drip feet, etc. The discharge time and interval can be adjusted according to different needs and the discharge time and interval time. The principle of the electronic drainer is: the opening and closing of the electromagnetic valve, the time and period of automatic drain opening can be adjusted by setting the upper switch.


Technical data of COMBO Jorc Type 1/2'' 1/4'' Electronic Drain Valves:

Ref Number COMBO / COMBO-D-LUX / COMBO-QUICKSET
Type JORC Type
Medium Temperature: 34 - 131 °F
Ambient Temperature: 34 - 131 °F
Valve Type: 2/2 way, Direct Acting
Orifice Size: 4 mm
Valve Seal: FPM
Inlet/Outlet Connection: 1/4" (F) & 1/2" (M) NPT / 1/2" NPT
Inlet Connection Height: 0.4"
Valve Housing Material: Brass or Stainless steel
Power Connection: DIN 43650A

Deconstruction diagram of COMBO-D-LUX JORC Type Timer Drain Valves:

Deconstruction diagram of COMBO-D-LUX JORC Type Timer Drain Valves


Timer display of COMBO-QUICKSET 2/2 Way Electromagnetic Drain Valves:
Timer display of COMBO-QUICKSET 2/2 Way Electromagnetic Drain Valves


Working display of AC220V/110V Electronic Condensate Drain Valves:
Working display of AC220V/110V Electronic Condensate Drain Valves

How to remove the electronic automatic drain valve for water in the air compressor?
In many industries, the requirements for compressed air in air compressors need to be water-free, but air compressors often have water, which causes the air compressors to have water. How to eliminate the use of electronic automatic drain valve?

1. Because there is always water in the air, the so-called humidity, after compression, it will become supersaturated, and the water in the air will be analyzed and become liquid. The moisture content of the compressed air is related to the humidity of the air. If the environment inside the equipment room is too humid, the water content in the air will exceed the standard of use.

2. The automatic drainer of the air compressor itself is blocked or the automatic drainer of the gas storage tank is blocked.

3. The corresponding dryer is not installed or there is no normal work after installation (the drying equipment fails, it is not found and processed in time), and finally the gas compressed by the air compressor is not treated in time, resulting in a large amount of moisture after the removal. Unable to meet normal usage requirements.

4. The post-measures are not sufficient. In the production process where the quality of the compressor gas is very strict, there are generally facilities such as precision filters, and the gas is subjected to a second action to further purify until the production requirements are met.

In order to ensure that the gas quality meets the production process, when there is water in your air compressor, you can check the cause according to the above situation, find out the fault and take remedial measures.

When is the general drain?
Depending on the specific use environment and usage conditions, drain the condensate regularly or install an automatic drain. Mainly depends on the humidity of the inhaled air and the outlet temperature of the air compressor.

Electronic and physical automatic drain
The automatic drainer has both electronic and physical. The principle of the electronic drainer is: the opening and closing of the electromagnetic valve, and the time and period of automatic drain opening can be adjusted by setting the upper switch. The physical drainer relies on the buoyancy of the buoy in the drain to open the drain. The liquid level in the drain rises, the buoy rises, and the valve automatically opens.


Welcome to your any question and inquiry!

Grupo de Produto : Válvula solenoide

Enviar e-mail para este fornecedor
  • Mr. Brandon Bao
  • Sua mensagem deve estar entre 20-8000 caracteres

Related Products list

Casa

Phone

Skype

Inquérito